|
These single channel "Class A" amplifiers
are inspired by the tone and features of vintage amps.
The combination of a well filtered power supply and original
circuitry allow these amps to move some serious air,
yet remain articulate no matter how hard they’re
driven – no mushy response here.
Tonally, the amps cover a wide range of sounds,
from chimey clean to thick overdriven tones, and
everything in between; controls are sensitive and
interactive, yet any setting is exceptionally musical.
Make no mistake - this is not a replica, you won’t
see this circuitry, build quality or tonal flexibility in
any other amp on the market. Hear the difference.
The reverb circuit is unique as it's wired in parallel with
the preamp versus series used by most amp manufacturers.
Because of this, our reverb circuitry doesn't color or change
the sound in any way.
Construction, Components &
Features
The Roaring amps are constructed using true
point-to-point wiring. By mounting all components directly
to tube sockets, jacks and pots, we are able to ensure the
purest signal path, maximum touch sensitivity and the least
amount of tonal degradation. Our amps are handmade and
extensively tested for tone as well as reliability. Hear the difference
- Heavy gauge welded aluminum chassis
- Custom Mercury Magnetics transformers
- Stainless steel hardware
- Pair of EL-84's cathode biased (quad
40 watt)
- Three 12AX7's, five w/reverb
- F&T and Sprague electrolytic capacitors
- Fast recovery diode rectifier
- Silver-plated Teflon wire
- Carbon film and metal film resistors
- Tubular polypropylene signal capacitors
Controls
- Blendable bright and normal volume
controls
- Master volume (fully bypassed when
cranked)
- Full set of tone controls: treble,
middle, bass
- Innovative presence control (settings
from warm & smooth to chimey & edgy)
- Reverb mix and dwell controls
- Impedance selector 4, 8, and 16 ohm
- Half power switch (40 watt only)
- Main and extension speaker jacks
- Foot switchable boost & reverb function
Cabinets
- 13-ply birch cabinets with Eminence Private Jack
speakers
- Available in 1x12, 2X10 and 2x12 combo
- Open or closed back 2X12 extension
cabinets
Dimensions
- 1X12 & 2X10 combo: H=20" W=24" D=9"
- 2X12 combo: H=20" W=28" D=9"
- Head: H=9" W=26" D=8 1/4"
- 2X12 closed back: H=24" W=30" D=12"
- 2X12 open back: H=20" W=26" D=10 3/4"
Models &
Pricing
Roaring-20
- 1X12 combo w/reverb $2750
- 2X10 combo w/reverb $2800
- Head w/reverb $2550
- Head $2300
Roaring-40
- 1X12 combo w/reverb $2950
- 2X10 combo w/reverb $2995
- 2X12 combo w/reverb $3250
- Head w/reverb $2750
- Head $2500
2X12 Extension Cabinets
- 2X12 closed back cabinet $775
- 2X12 open back cabinet $650
- $50 up-charge for custom tolex & grill
Chassis
Click Here
for a Larger View
Click Here
for a Larger View
|
Earl Slick with his Roaring-40
Roaring-20 Head with Closed Back
2x12 Cabinet w/Standard Tolex & Grill
Roaring-20 Head with Open Back Cabinet 2x12 Red Tolex w/Cane Grill
Roaring-20 1x12 or 2X10 Combo w/ Standard Tolex & Grill
Roaring-40 2x12 Combo Wine Tolex w/Salt & Pepper Grill
|
